Chapter 9—Supplemental Information
ENSONIQ MR-Rack Musician’s Manual 31
Card
* Unformatted card *
The format of the card inserted was not recognized.
PCMCIA Card Inserted Registering...
This message appears while the MR-Rack adds the contents of a
card to its directory index after a card is inserted.
PCMCIA Card Removed Unregistering...
This message appears while the MR-Rack removes the contents of a
card from its directory index after a card is removed.
Card Write Protect!
This message is to remind you that you can’t write to ROM cards
and write-protected cards.
No Card Inserted!
This message is to remind you that no card is present, and hence the
copy function selected cannot be executed.
Sorry! Save to card failed. Check media
The attempted save to the card has failed have the card inspected
for electrical anomalies.
Sorry! Too big. Hit ENTER to copy ###%.
Message to inform you that the ROM card sound bank that you want
to copy to RAM won’t all fit, and a prompt to perform a partial copy
(a percent).
* Card battery low *
The MR-Rack’s card battery has a low voltage.
MIDI SysEx
Dump: <dump type> Sending...
Message to inform that the MR-Rack is transmitting MIDI SysEx.
RCV: <message type> Receiving <msg type>
Message to inform that the MR-Rack is receiving MIDI SysEx.
RCV: <message type> Successful!
Message to inform that MIDI SysEx reception is complete.
Bad location
This is displayed when trying to send a sound into a ROM location.
Wrong checksum
This appears if the checksum is incorrect.
Failed! May be hosed
Message to inform you that the Sound or Performance bank may be
corrupted.
Sorry! No memory for sound sent from MIDI
Message to inform that the MR-Rack does not have sufficient
memory to store the single sound SysEx message that was sent to it.
To Next Page
Loading...
