ENSONIQ SQ-80 - Page 122

SQ-80 — Musician's Manual
to scroll the available characters and the
LEFT and RIGHT Buttons to move the Cursor, until
the Display shows the Song Name you want.
> Press
*YES* to Create the Song. You will then be placed on the SONG EDIT Page from which
you can combine Sequences to form a Song (see SONG EDIT Page, p. 136). Or Press
*NO* to
cancel the procedure for any reason.
Helpful Hint: There is a shortcut which lets you bypass the CREATE/ERASE Page when you want
to create a new Sequence or Song. Press the blue
SEQ button and go to any Sequence or Song Select
Page. Press the "Soft" button which corresponds to any unused Sequence or Song location (one that reads
XXX- instead of SEQ or a Song name). You will automatically be placed on the CREATE SEQUENCE
or CREATE SONG screen shown previously, bypassing the
CREATE/ERASE Page. The Sequence
or Song location you pressed is the one that will be created if you press
*YES*.
6. ERASE SEQUENCE
Erasing a Sequence returns that Sequence Memory Location to its undefined, or empty state. The
Sequence you want to Erase must be selected before entering the
CREATE/ERASE Page.
To ERASE a Sequence
____> Make sure the Sequence you want to Erase is selected.
____> Select CREATE/ERASE Page.
− Press
ERASE SEQ. The Display asks "ERASE EXISTING SEQ
____> Press
*YES* to Erase the Sequence. You will be returned to the Sequence Select Page. Or Press
*NO* to cancel the procedure for any reason.
8. ERASE SONG
Erasing a Song returns that Song Memory Location to its undefined, or empty state. The Song
you want to Erase must be selected before entering the
CREATE/ERASE Page.
To ERASE a Song
− > Make sure the Song you want to Erase is selected.
Select
CREATE/ERASE Page.
− Press
ERASE SONG. The Display asks "ERASE EXISTING SONG SONG00" (where
SONG00 stands for whatever the name of the Song is).
> Press
*YES* to Erase the Song. You will be returned to the Song Select Page. Or Press *NO*
to cancel the procedure for any reason.
10. ERASE ALL
This procedure will erase all Sequences and Songs in the SQ-80's Memory. This is not something
you want to do casually. Save any Sequencer data you value to Disk before you even think about
doing an
ERASE ALL.
ERASE ALL will return every Sequence except SEQ 01, and every Song except SONG 00 to
its undefined state. (You can't totally Erase the last Sequence. There will still be one Sequence
and one Song. defined, though after an
ERASE ALL they contain no Track or Song, Data.)
To ERASE ALL Sequences and Songs
− > Save any Sequences and Songs you want to keep (see Storage Page, p. 153).
− Select
CREATE/ERASE Page.
____> Press
ERASE ALL. The Display asks "ERASE ALL SEQUENCES AND SONGS".
− Press
*YES* to Erase All Sequences and Songs in Memory. You will he returned to the Sequence
Select Page. Or Press
*NO* to cancel the procedure for any reason.
110 Section 4 — The Sequencer