SQ-80 — Musician's Manual
Selecting a Program — Internal
Now that you've selected one of the four Banks, you can see the names of the ten
Programs in that Bank.
Say you selected
Bank 1. The Display should look something like this:
Pressing the button above or below any of the ten Program names selects that Program as the current
sound. Try selecting and playing a few different sounds. Notice that when you select a Program, its name
is underlined.
The currently selected Program is always underlined.
Notice also that in the upper-left corner of the Display you will always find the Page Name, which
corresponds to the name of the button (or buttons) you pressed to get to that Page. (In this case.
INT 1,
meaning INTERNAL Memory, Bank 1.)
Press the other three
Bank Select Buttons #2, 3 and 4 to get to the other 30 Programs in the Internal
Memory. and select them in the same way. Note that displaying a new Bank or Master Bank does not
affect the selected Program. A new Program can only
be selected by pressing one of the ten buttons above
and below the Display.
To Select an Internal Sound:
− Press INTERNAL.
> Press
Bank Select #1, 2, 3, or 4 .
− > Select a Program by pressing the Button above or below a Program Name.
Selecting a Program — Cartridge
First, insert an
ENSONIQ E
2
PROM Storage Cartridge, or other
SQ-80- or ESQ-compatible Program Cartridge, in the Cartridge Slot as
shown below, with the label facing towards you.
8 Section 1 — First Things First
To Next Page
Loading...
Need help?
General
