SQ-80 — Musician's Manual
You can Re-record the Track, Punch In or Punch Out, as described earlier, just as you would for Tracks
that play Internally.
Note: Most often you will be recording Sequences which contain some MIDI Tracks and some LOCAL
Tracks. When this is the case, be sure that you assign
LOCAL Status (as opposed to BOTH) to the Tracks
that you want to play only on the
SQ-80. This will avoid 1) accidentally sending unintended MIDI Data
to an external instrument, and 2) sending out a lot of unnecessary information, which tends to slow things
down.
ote also that when a Track is assigned BOTH Status, the Internal Program it will play and the Program
on the external instrument must have the same Program Number. This may require rearranging some
of the Program locations within the
SQ-80 and/or your other instruments.
Section 4 — The Sequencer
119
To Next Page
Loading...
