SQ-80 — Musician's Manual
6) QUANTIZE — Auto-Correct
The Quantize or Auto-Correct function can take a less than perfect Track and put it right on the beat.
The
SQ-80 uses post-quantization — that is, you first record a Track, then apply the Auto-Correct later
as an Editing option. This has two advantages over quantizing a Track on the way in.
First, you are less likely to accidentally Quantize a Track to sixteenth-note triplets, or some other value
that's not what you had in mind. Second, by putting up the
PLAY/KEEP Page after each Quantize
rocedure, the SQ-80 gives you the chance to hear the effect of a given quantization before deciding
whether to keep it.
To QUANTIZE a Track:
-> Make sure the Track you want to Quantize is selected. -
> Select
EDIT Page, and press TRACK.
-> Press
UANTIZE
the Dis
la
shows the followin
:
-> Use the Data Entry Slider and
the Up and Down Arrow Buttons
to select the Quantization value
you want. For whatever value is
selected. the beginning of
each note played is moved to
the nearest note of
that value. The length of a note is not changed — each entire event will he moved so that its
beginning (or Key Down) falls on the nearest Quarter note, Eighth note. Sixteenth note. etc.
Quantization values that can be selected here are:
1/4 — Quarter Notes
1/4T — Quarter Note Triplets
1/8 — Eighth Notes
1/8'1' — Eighth Note Triplets
1/16 — Sixteenth Notes
1/16T — Sixteenth Note Triplets
1/32 — Thirty-second Notes
1/32T — Thirty-second Note Triplets
-> After selecting a Quantization value, press *YES* to Quantize the Track to that value. Press
*NO* to return to the EDIT TRACK Page.
-> Pressing
*YES* Quantizes the Track to the desired value, then puts you on the PLAY/KEEP
Page:
Section 4 — The Sequencer 123
To Next Page
Loading...
