SQ-80 — Musician's Manual
To COPY a Track to Another Track:
-> Make sure the Track
y
ou want to make a Copy of (the Source Track) is selected. -
> Select
EDIT Page, and press TRACK.
-> Press COPY — the Display shows the following.:
Use the Data Entry Slider and
the lip and Down Arrow But-
tons to choose which Track the
selected Track will be Copied
into (the Destination
Track).
This must be a Track that
hasn't yet been defined.
-> Press
*YES* to Copy the Source Track onto the Destination Track. You will then be returned
to the EDIT TRACK Page. Or Press
*NO* to cancel the procedure for any reason.
126 Section 4 — The Sequencer
To Next Page
Loading...
