SQ-80 — Musician's Manual
SONG EDIT PAGE
For Chaining Sequences together to make Songs.
(
Inactive Buttons Appear
in White)
The SONG EDIT Page appears when you 1) Create a new Song, or 2) select SONG from the menu
on the
EDIT Page.
READOUTS AND ACTIVE CONTROLS:
1. SONG NAME (RENAME SONG)
The Name of the selected Song appears in this Location. You can change the name of an existing
Song if you like. Pressing the "Soft" button above the Song name puts you on a
RENAME
SONG sub-page. The procedure for renaming a Song is the same as for naming it when first
created. Use the Data Entry Slider and the Up and Down Arrow buttons to choose the character
you want; then use the MOVE CURSOR buttons to select a different character. Repeat the
process until the name you want shows on the Display. Press
"EXIT" to return to the SONG
EDIT
Page with the new name in place.
2. STEP
This tells you which Step of the Song you are on. Up to 99 Steps can be programmed into a Song.
The Step Number which appears here is always the one you are currently Editing. You move from
one step to another by pressing the
PREV and NEXT Buttons (see below).
3. TR — TRANSPOSE
This control will Transpose (raise or lower the pitch of) the selected Sequence for the duration
of the Step. If
TR= anything other than Zero for a given Step, when the Song reaches that Step
every Track in the Sequence will be Transposed up or down by the selected amount. Each
increment represents a semitone (halfstep). The range is from one Octave up (+12) to one Octave
down (-12).
136 Section 4 — The Sequencer
To Next Page
Loading...
