SQ-80 — Musician's Manual
MIDI Program Numbers on the SQ-80
The Chart below shows the Program Number of each Internal and Cartridge Program on the SQ-80. For
each Program Bank, the chart shows the Program number that corresponds to each of the ten locations
on the Display. For a given
SQ-80 Program, this number is:
1) The Program Number (plus 1; see note below) that will be sent out over MIDI whenever the
corresponding
SQ-80 Program is selected (assuming Program Changes are Enabled);
2) The Program Number that will cause the corresponding
SQ-80 Program to be selected when it is
received over MIDI: and
3) The number that will show on the
TRACK PROG NUM Sub-Page of the Mix
•
MIDI Page, when
the corresponding Program is selected for a Track on the
Tracks Select Page.
Note: True MIDI Program Numbers begin at 00 instead of one. To determine the true MIDI Program
number, subtract 1 from the number shown in the table above.
188 MIDI Program Numbers
To Next Page
Loading...
