Section 7 — Effect Parameters TS-12 Musician’s Manual
16
18 ROTOSPKR+ROTOSPKR+REV
This parallel effect combines a rotary speaker with another rotary speaker effect and a reverb.
The second sub-page (not user-programmable) shows how this effect is routed:
• Voices assigned to FX1 (and panned left) are sent to Effect A (ROTOSPKR)
• Voices assigned to FX1 (and panned right) are sent to Effect B (ROTOSPKR)
• Voices assigned to FX2 are sent to the reverb (REV)
For a complete description of the SENDS and the ROTO parameters, refer to the
DDL+ROTOSPKR+REV algorithm found earlier in this section.
For a complete description of the remaining Reverb parameters, refer to the
DDL+CHORUS+REV algorithm found earlier in this section.
19 DISTORT+ROTOSPKR+REV
This parallel effect combines a raspy distortion with a rotary speaker and a reverb. The second
sub-page (not user-programmable) shows how this effect is routed:
• Voices assigned to FX1 (and panned left) are sent to Effect A (DIST)
• Voices assigned to FX1 (and panned right) are sent to Effect B (ROTOSPKR)
• Voices assigned to FX2 are sent to the reverb (REV)
For a complete description of the SENDS parameters, refer to the DDL+ROTOSPKR+REV
algorithm found earlier in this section.
For a complete description of the DISTORT parameters, refer to the DISTORT+CHORUS+REV
algorithm found earlier in this section.
For a complete description of the ROTO parameters, refer to the DDL+ROTOSPKR+REV
algorithm found earlier in this section.
For a complete description of the remaining Reverb parameters, refer to the
DDL+CHORUS+REV algorithm found earlier in this section.
20 PARAM EQ+ROTOSPKR+REV
This parallel effect combines a parametric EQ with a rotary speaker and a reverb. The second
sub-page (not user-programmable) shows how this effect is routed:
• Voices assigned to FX1 (and panned left) are sent to Effect A (PARAM EQ)
• Voices assigned to FX1 (and panned right) are sent to Effect B (ROTOSPKR)
• Voices assigned to FX2 are sent to the reverb (REV)
For a complete description of the SENDS parameters, refer to the DDL+ROTOSPKR+REV
algorithm found earlier in this section.
For a complete description of the PARAM EQ parameters, refer to the PARAM
EQ+CHORUS+REV algorithm found earlier in this section.
For a complete description of the ROTOSPKR parameters, refer to the DDL+ROTOSPKR+REV
algorithm found earlier in this section.
To Next Page
Loading...
Need help?
General
