31
RAK111_ENG / © Ensto 2019
16.1. Mounting the Extension Box
Mount the extension box as near to the Wallbox as possible to minimize the length of the con-
nection cables.
Items needed: Extension box EVK... 1 pcs
Fastening set including mounting lugs and screws
Screws
Installation steps
1. Put the fastening lugs in place on the
rear side of the enclosure.
2. Secure the lugs with the screws in-
cluded.
3. You can put the fastening lugs in three
possible positions.
4. Prepare the wall for installation. Use
screw type depending on the wall type.
21
4.5
6.8
0°
45°
90°
To Next Page
Loading...
