9
RAK111_ENG / © Ensto 2019
5. Mounting instructions
5.1. Before Installation
Remove the Wallbox from its package. Do not scratch the surface of the Wallbox after removal
from the package.
When selecting installation site, take into account the following:
• The minimum space needed for operating and maintenance.
• Make sure that the mounting foundation is suitable and robust.
• In order to ensure the optimal charging performance, the charging unit should not be
exposed to direct sunlight.
Follow always national regulations and
site requirements
Recommendation
1200 mm
min. 400 mm
min. 200 mm
To Next Page
Loading...
