ensto Wallbox - Commissioning; Connecting to Wallbox

20
RAK111_ENG / © Ensto 2019
7. Commissioning
Before commissioning the Wallbox must be installed according to the installation instructions.
By default all Wallboxes are operating in free charging mode (standalone operation). In this
free charging mode external communication (Ethernet, 2G/3G/4G) is not active. If the Wallbox
is going to be connected to some back-oce (online mode), rst make sure that the basic
function ality is working before establishing communication.
7.1. Connecting to Wallbox
If you want to change the default settings, you must connect to Wallbox via web conguration
tool to be able to proceed with the commissioning settings. Use Firefox or Windows Explorer
web-browser for conguring.
Micro USB service
port
Please see detailed commissioning instructions on
https://evwiki.ensto.technology/