Enterasys 2H25x - Page 245

Built-in Commands
Network Tools Screens 11-9
Example:
-> show Appletalk interfaces
# Interface AdminStatus OperStatus MTU Forwarding Framing
# 1 enabled enabled 1500 enabled ethernet
# 2 disabled disabled 1500 disabled ethernet
> show IP ARP
# Interface MediaType Physical|Address NetworkAddress
#3 3(dynamic) 00:00:1d:04:40:5d 123.456.40.1
#4 3(dynamic) 08:00:20:0e:d8:31 123.456.40.30
# Number of valid entries: 2
traceroute
Description: Generates a TRACEROUTE request to a specified IP address and provides a
display of all next-hop routers in the path to the device. If the device is not
reached, the command displays all next-hop routers to the point of failure.
Syntax: traceroute [IP address]
Options: None
Example:
-> traceroute 122.144.11.52
# next-hop[0]:122.144.60.45
# next-hop[1]:122.144.8.113
# next-hop[2]:122.144.61.45
# 122.144.11.52 is alive:3 hops away.
show (Continued)