Entone FusionTV - Schedule a Manual Recording



Recording TV
Recording TV
3332
7. A series record icon will appear next to the episode to be recorded. The
indicates a series of episodes matching the program title to be recorded.
Press GUIDE again or the EXIT button to exit the Program Guide.
Find Future Times the Episode or Series is Playing:
1. Press GUIDE on the remote to view the Program Guide.
2. Use the ARROW KEYS to select a program and press OK.
3. The “Program Options” menu is displayed. Use the ARROW KEYS to select
“Find Other Times” and press OK.
4. If the episode or series is available in the future, a list of the episodes is
displayed with the dates the episode are scheduled to play.
5. Use the ARROW KEYS to select the desired episode and press OK.
6. Follow the previous instructions for recording an episode or series.
Schedule Two Recordings Simultaneously
The FusionTV service comes with dual TV tuners which provide a variety of
options for you to watch and record your favorite programs. You can schedule
two recordings simultaneously while watching another pre-recorded show, all
at the same time.
To Schedule Two Recordings, You Need to Press GUIDE to Bring up the
Program Guide:
1. While viewing the current channel, before switching away, set it to record
by one of the previously mentioned methods. (The REC button requiring
no further conrmation, or with the OPTIONS button requiring you to
conrm recording options).
2. Press the GUIDE button and navigate to the second channel you wish to
record.
3. Once again, press the REC or OPTIONS button on the remote to begin
recording the second program. You can choose to view either program
while recording.
Your two tuners only allow you to have two dierent Live TV programs to view
and record. If you try to switch channels, a dialog box informing you to stop one
of the recordings with the option of which recording to stop will appear.
Your best option in this case is to watch a previously recorded program, or you
will be required to stay on one of the channels currently being recorded.
Schedule a Manual Recording
When no guide data is present or when you are receiving limited guide data
from the Program Guide, you may choose to perform a manual recording by
following these steps:
1. Ensure the accuracy of your system clock.
2. Know the exact start and end times of the program you wish to record.
3. Navigate to the desired channel and press the OPTIONS button on your
remote.
4. Click “Manual Record”. Do not select the “Record Program” option at this
time.
5. Set the “Starting Time”, “Record Length”, “Channel”, “How Often”, and the
“Date”.
6. Conrm all recording options are set properly, then select “Record
Program”.
To Manually Record a Program Using the REC Button on Your Remote, Just
Simply:
1. Switch to the appropriate channel when the program is expected to start.
2. Press REC when the program begins to start recording.
3. Press STOP when the program ends to stop recording.