Page 25
PRESET MANAGER
Click on the Preset Manager button at the top of the screen to
switch in & out of the Preset Manager screen.
You can create any number of banks, and each bank contains any number of presets.
To create a new preset, adjust the
channel faders to their desired positions,
set up any sound activation or oscillators,
and then click on “New” under the preset
list.
It is entirely up to you how to organize
banks. A nice approach is to have one
bank per song, each containing a list of
presets (in correct order) for every point
in the song where you need a lighting
change. Then, you can simply tap on your footswitch at the appropriate points to advance
through your light show.
Switching between banks & presets
You can switch banks & presets in a number of different ways:
Click directly on the bank/preset on screen with your mouse
Click on the up/down arrows above the bank/preset lists
Use a footswitch connected to the DMXIS interface
Use MIDI Learn to control the up/down arrows from a MIDI keyboard
Send Note On messages to DMXIS on MIDI channels 15 & 16
If you are using the DMXIS plug-in, you can easily add a MIDI track to your song
containing all your bank/preset changes, thus entirely automating the light show.
Managing banks
The buttons under the bank list allow you to create New
banks, Rename existing banks, and Delete existing banks.
To Next Page
Loading...