Page 9
WELCOME!
DMXIS is a flexible, easy to use
lighting control package, specifically
designed for live performers.
Most lighting controllers assume that an
operator is available to manually control
the show. They are often packed with
features that are of little use to the live
performer who just wants a nice looking
light show with a minimum of fuss.
DMXIS was designed specifically for live
performers who want to run an automated light show while performing on stage. The
hardware is incredibly easy to connect up, and the software extremely simple to learn
and operate, while being flexible enough to control modern intelligent light fixtures.
With DMXIS, you pre-program your entire light show in advance, letting you concentrate
on your live performance. You can then manually step through the light show using a
simple footswitch plugged into the DMXIS hardware interface. Or, if you use audio
software such as Logic, Ableton Live, Cubase or Mixmeister in your live show, you can use
the DMXIS plug-in (VST or Audio Unit) to run your lights directly from your audio
software! This is incredibly effective, as your light show automatically synchronizes to the
performance, even if you change tempo live.
ABOUT THIS MANUAL
New 1.1.0 features are clearly marked with NEW!
This manual is a quick introduction and reference guide for DMXIS. For a more
comprehensive introduction to DMXIS and its features, please watch the tutorial videos
located on your original software CD. They are much more fun than reading a manual!
To Next Page
Loading...
