Page 34
New Rename Fixture feature (See page 23)
Autorun Bank now plays from the first preset when a new bank is selected.
Improved start-up time of DMXIS standalone program on Windows.
RELEASE 1.0.3
Bug fixes
Increased reliability of transmitted DMX data when used with certain low cost
fixtures.
MIDI assignments cleared with the “Forget” were not being stored on exit.
Enhancements
Added “Bank Tempo” control to the Preset Manager page. (See page 27)
MIDI Learn now supports 7 & 14 bit NRPN messages. (See page 24)
DMXIS now displays all 16 MIDI input channels in Ableton Live. (In the previous
release, only MIDI Ch 1 was available). You can switch DMXIS banks/presets by
routing Ableton clips containing Notes to Ch 15/16 (as described on page 25)
When the VST/Audio Unit plug-in is loaded or deleted, it does not clear the DMX
channel values. The most recent DMX values will be held by the DMXIS
hardware until a new preset is explicitly loaded into DMXIS. This allows you to
change between songs in your audio host without plunging the audience into
darkness!
On the Footswitch Settings window, the “Click & hold time” range can now be
set to 0mS. Useful if you are using a footswitch for the “Last Preset (while held)”
feature, and want immediate response to the switch being pressed.
Fixtures pop-up menu now uses subcategories within each manufacturer if
necessary (i.e. if there are too many fixtures to fit on the screen).
RELEASE 1.0.2
Initial public release
- end of document -
To Previous Page
Loading...
