EMW90HDNC1A Air-cooled Chiller
Protective measures must be taken during
electrical maintenance, such as wearing
insulating gloves or insulating shoes.
Operational Safety
When the chiller is running, please do not
touch the internal components of the chiller
with your hands at will to avoid electric shock
or injury by the fan blades of the fan.
If severe vibration or abnormal sound occurs
during running or debugging of the chiller,
please stop all operations and immediately cut
off the circuit switch for inspection.
All circuit switches should be disconnected
during inspection and maintenance, and
guards should be set up to prevent others from
closing the circuit switches by mistake.
Only when all the circuit switches are turned
off and the internal control board no longer
flashes the signal light, can you operate the
device circuit and electronic devices, and you
must wear anti-static gloves.
Do not allow liquids such as water to enter the
terminal area of the device during installation
and maintenance.
It is forbidden to carry heavy device by hand
alone. Please wear protective gloves when
carrying light device by hand.
Please wear protective gloves when there are
sharp objects (such as fins, etc.) in the
operating parts.
Be careful when cutting the cable tie to avoid
cutting the cable.
Application Safety
Do not use this product in a flammable and
Please be cautious when professional
maintenance is involved. For details, please
consult the customer service center of the
product manufacturer.
Recycling
It is strictly forbidden to dispose of this
product as unsorted municipal waste, please sort
it and recycle it. The disposal of scrap must
comply with relevant requirements and adopt
special methods for independent treatment to
avoid potential pollution to the environment
.
To Next Page
Loading...