Division:
36 I 77
In the delivery state, the note shown above appears when tapping the "ON/OFF" button. This
means that the alarm unit incl. the supplied safety weighing enclosure has not yet been
officially qualified by an a1-safetech service technician. In this case, please follow the
instructions on the display and contact a1-envirosciences GmbH at the indicated service
hotline. Return to the standby screen by tapping the "OK" button (III).
After successful qualification by an a1-safetech service technician, the alarm system can be
switched on by tapping the "ON/OFF" button.
Via the main screen, the user can use all features of the containment system and monitor
the operating states via the capacitive touch display. When the main screen is displayed, the
qualified system is in normal operating mode.
Via the "Info" button (III), the user can obtain further information about the enclosure and the
alarm system.
To Next Page
Loading...