EOS Cubo / Cubo Avantgarde - Installation and Operating Instructions EN-43
Maintenance
Replacing the heating element
1 Identify the defective heating element by taking measurements.
2 Remove both flat plugs for the defective heating element from the flat
pins (B).
3 Loosen both nuts (A) and lock washers on the defective heating ele-
ment.
4 Push the heating element down gently and remove it.
5 Insert the new heating element.
6 Secure the heating element with the lock washers and nuts.
7 Plug in the flat plug.
Check the wiring on all heating elements before reassembling the
heater and standing it up.
A Nuts (M14) and lock washers B Flat pins for flat plugs
A
B
To Next Page
Loading...
