20
GB
If the sauna bath should be fi nished before-
hand, press the "An/Aus "button. The
symbol distinguishes on the display and only
the current time is still displayed.
The cabin lighting automatically switches off
after 30 minutes. You can switch the lighting
off at any time using the "licht
" button.
The buttons to be confi rmed are shown and quoted in the text as follows.
Symbols shown in the display sketches, framed with the symbols , are displayed fl ash-
ing on the unit.
Any change to the set parameters must be saved by pressing the "Funktion/Mode"
button. The respective newly set values fl ash briefl y before the unit switches back to the basic
display.
If you change the parameters without saving with the "Funktion/Mode" button, the previous
values are automatically reactivated.
If you do not operate the unit for a longer period during programming, the display automati-
cally returns to the basic display and the background illumination goes out after a brief period.
To consider when programming:
20:03
" An/Aus " "Licht "
"Ab
" "Auf ""Funktion/Mode"
To Next Page
