41
GB
Press the „ „ button for approx. 5
seconds. The coloured light symbol and the
number 0 appear on the display.
This programming option is only available if the coloured light module (item
number 942761 / 944286 / 944834) has been installed.
Coloured light (optional)
Switch off all power to the system before installing the coloured light mo-
dule.
Switching on the coloured light
0
You have the option of operating a coloured light device in your sauna using the HCS 9003
control unit. Each coloured light may not exceed the maximum power of 100 W.
1
Please chose the wished value with the „
„ and „ „ buttons.
They mean:
Art.No.: 94.2761 Art.No.: 94.4286 Art.No.: 94.4834
0 off
1 automatic mode permanent withe
2 permanent red
3 permanent yellow
4 permanent green
5 permanent blue
6
permanent
red yellow green blue
automatic mode 1.min
7
permanent
yellow green blue
automatic mode
2.min
automatic mode
4.min
8
permanent
red green blue
automatic mode
5.min
automatic mode
9 Sunrise
To Next Page
