80
80
Please note that this function may only be
programmed in combination with incande-
scent bulbs, we recommend to use special
bulbs like baking oven bulbs.. No phospho-
rous, energy-saving or gas discharge bulbs
may be used.
The default light setting is maximum. You
can dim the cubicle lighting of your sauna
as you wish.
For illumination power adjustment please
press „Mode“ button.
Afterwards the „…“ button until in the display
the light symbol and „P7“ appears.
Please confi rm with the „Mode“ button.
Please chose the wished value with the
„
„ and „ „ buttons.
Please confirm with a long press on the
„Mode“ button until the new value is fl ashing
on the display.
Afterwards the displays shows „P7“ for short
time. Illumination power is now fi xed with
the new value.
To Next Page
