14
2) AC Load
Recommended wire size of the AC load and the circuit breaker is as below.
Making the connection wire of the AC load:
Strip the AC load connection wires (3 pcs) for about 10 mm.
3) PV modules
Recommended wire size of the PV module and the circuit breaker is as below.
Since the PV array's output current varies with the type, connection method, or sunlight angle, its minimum
wire size can be calculated by the short circuit current(ISC). Please refer to the ISC value in the PV
module's specifications. When the PV modules are connected in series, the total ISC equals any PV
module's ISC. When the PV modules are connected in parallel, the total ISC equals all PV modules' ISC.
Please refer to the table below:
To Next Page
Loading...
