Epiroc COP RR14 - Hydraulic Motor; Hydraulic Motor Removal; Hydraulic Motor Installation

Hydraulic Rock Drill COP RR14 / SC14 Ver. C 9 Hydraulic Motor
31 No: 4124851851.2.9007203379904011 en-US
9 Hydraulic Motor
9.1 Removing Hydraulic Motor
1.
Undo and remove lock nuts (11) and screws (10).
2.
Remove hydraulic motor (500) from gear housing (200).
9.2 Installing Hydraulic Motor
1.
Lubricate the gear housing (200) and the hydraulic motor splines (500) with grease.
2.
Install hydraulic motor (500) to gear housing (200).
3.
Apply oil to screws (10) and lock nuts (11).