Epson 1200 series - SCSI Configuration Changes

7
Maintenance and Troubleshooting
7-27
R4C448
Rev. C
A5 size CHAP7.FM
2/11/00 Pass 3
R
Proof Sign-off:
tanto name SEI Y.Takasaki M.Fujimori
leader name M.Fujimori
editor name SEI M.Kauppi
Changing the SCSI ID number or SCSI board
If you are using your scanner with Windows 98 and you want to
change the scanner’s SCSI ID number or replace the SCSI board
with a new one, follow the steps below.
1. Double-click the Scanners and Cameras icon in the Control
Panel.
2. Select your scanner in the installed devices list, then click
Remove
.