Epson AL-M200 Series User Manual

Paper Type Plain (60 - 105 gsm)
Lightweight Cardstock (106 - 163 gsm)
Labels
Envelope
Recycled
Loading Capacity 10 sheets of plain paper/one sheet of lightweight cardstock paper
Note:
❏ SEF and LEF indicate the paper feed orientation; SEF stands for short-edge feed. LEF stands for
long-edge feed.
❏ Use only laser print media. Do not use ink jet paper on your printer.
See Also:
❏ “Loading Print Media in the Paper Tray” on page 106
❏ “Loading Print Media in the Priority Sheet Inserter (PSI)” on page 115
❏ “Loading Envelopes in the Paper Tray” on page 111
❏ “Loading Envelopes in the Priority Sheet Inserter (PSI)” on page 118
Printing on print media that differs from the paper size or paper type selected on the print driver may
lead to paper jams. To ensure that printing is correctly done, select the correct paper size and paper
type.
Loading Print Media
Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading print media, identify the recommended print side of the print media. This information
is usually on the print media package.
Note:
After loading paper in the paper tray or the Priority Sheet Inserter (PSI), specify the same paper type on
the operator panel.
AL-M200 Series User’s Guide
Printing Basics 105

Epson AL-M200 Series Specifications

General

Print Technology	Laser
Max Resolution	1200 x 1200 dpi
Monthly Duty Cycle	20, 000 pages
Warm-up time	15 seconds
Paper Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Paper Input	250-sheet
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Duplex Printing	Yes (Automatic)