4. Click Close.
5. Click the X button at the top-right of the dialog box to close the Package Installer dialog box.
Specifying the Queue
To perform printing, you must set up the print queue on your workstation.
Note:
When you have finished specifying the queue, you can then sent print jobs from applications. Start a
print job from an application, and specify the queue in the print dialog box. Depending on the
application (Mozilla, for example), however, you may have to use the default queue for printing. In such
a case, you must specify a queue you want to use as the default queue. For details on specifying the default
queue, see “Specifying the Default Queue” on page 94.
For Red Hat Enterprise Linux 6 Desktop (x86)
1. Open the URL "http://localhost:631" using a web browser.
2. Click Administration.
3. Click Add Printer.
4. Enter root as the user name, and then enter the administrator password.
5. Click OK.
6. Select either of the following according to the type of your printer connection.
For a network printer:
a
Select LPD/LPR Host or Printer from the Other Network Printers menu, and then click
Continue.
b
Enter the IP address of the printer in Connection.
Format: lpd://xxx.xxx.xxx.xxx (the IP address of the printer)
c
Click Continue.
AL-M200 Series User’s Guide
Printer Connection and Software Installation 90
To Next Page
Loading...
Need help?
General
