Name: Epson AL-M200 Series
Brand: Epson
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Note:

❏ If you forget your password, turn off the printer. Then, while holding the

(Menu) button, turn on

the printer. Continue to hold the

(Menu) button until the LCD panel shows Ready to

Print.

❏ If you want to change the password while Panel Lock Set is Enable, perform steps 1 and 2. Enter

the current password, and then press the

button. Perform steps 3 and 4. Select Change

Password, and then press the

button. Enter a new password, and then press the button. This

will change the password.

Disabling the Panel Lock Feature

1. Press the (Menu) button.

2. Select Admin Menu, and then press the

button.

3. Enter the password, and then press the

button.

4. Select Secure Settings, and then press the

button.

5. Select Panel Lock, and then press the

button.

6. Select Panel Lock Set, and then press the

button.

7. Select Disable, and then press the

button.

Note:

The password is reset to 0000 when the setting for Panel Lock Set is changed from Enable to

Disable.

Changing the Power Saver Mode Settings

The printer enters a power saver mode after the specified time period of inactivity. You can set Power

Saving Timer to place the printer in either of the power saver modes.

1. Press the

(Menu) button.

2. Select Admin Menu, and then press the

button.

3. Select System Settings, and then press the

button.

AL-M200 Series User’s Guide

Using the Operator Panel Menus 172

Questions and Answers:

Need help?

Do you have a question about the Epson AL-M200 Series and is the answer not in the manual?

Epson AL-M200 Series Specifications

General