Epson AL-M200 Series User Manual

❏ Keep print media stored in an acceptable environment.
❏ Do not remove the paper tray cover while printing is in progress.
❏ Ensure that all cables that connect to the printer are correctly attached.
❏ Overtightening the guides may cause jams.
See Also:
❏ “About Print Media” on page 100
❏ “Print Media Storage Guidelines” on page 102
❏ “Supported Print Media” on page 102
Identifying the Location of Paper Jams
!
Caution:
Do not attempt to remove a paper deeply jammed inside the product, particularly a paper wrapped
around the fusing unit or the heat roller. Otherwise, it may cause injuries or burns. Switch off the
product immediately and contact your local Epson representative.
Important:
Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer.
AL-M200 Series User’s Guide
Troubleshooting 175

Epson AL-M200 Series Specifications

General

Print Technology	Laser
Max Resolution	1200 x 1200 dpi
Monthly Duty Cycle	20, 000 pages
Warm-up time	15 seconds
Paper Capacity	250 sheets
Connectivity	USB 2.0, Ethernet
Paper Input	250-sheet
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Duplex Printing	Yes (Automatic)