Contrast adj.
You can adjust the contrast of the LCD screen. Press the u Up or d Down button to adjust contrast.
Auto Cleaning
This printer automatically checks the print head nozzles without printing a pattern and cleans the
nozzles if they are clogged. Some ink is consumed from all cartridges while checking the print head
nozzles.
You can choose to turn this function Off or On.
Low Speed Mode
This function may prevent the print head nozzles from becoming clogged.
You can choose to turn this function Off or On.
Network setting menu
This menu allows you to make network settings.
Item Parameter
Network setup Auto -
Panel IP address 000.000.000.000–255.255.255.255
Subnet mask 000.000.000.000–255.255.255.255
Default gateway 000.000.000.000–255.255.255.255
Bonjour On, Off
Init N/W set -
Network setup
You can select the method to configure the network settings.
When Auto is selected, the printer obtains the IP address, Subnet mask and Default gateway
automatically. When Panel is selected, you can specify the IP address, Subnet mask, Default gateway
and Bonjour settings using the control panel. When Init N/W set is selected, you can revert the
network settings of the printer to the factory default value.
B-310N/B-510DN User’s Guide
Using the Control Panel 128
To Next Page
Loading...
