Maintenance Box
Checking the maintenance box status
Using the control panel
To check the maintenance box status using the control panel, follow the steps below.
1. Make sure that READY appears on the LCD screen, and then press the r Right button. Menu
appears on the LCD screen.
2. Press the d Down or u Up button to select PRINTER STATUS, and then press the OK or r Right
button.
3. Press the d Down or u Up button to select MAINTENANCE BOX, and then press the OK or r Right
button.
4. A rough estimate of the remaining capacity of the maintenance box appears on the LCD screen.
Note:
You can check the maintenance box status by the icon displayed on the lower right of the LCD screen as
well.
& See “Icons on the LCD” on page 123.
For Windows
Note:
Epson cannot guarantee the quality or reliability of non-genuine maintenance box.
To check the maintenance box status, do one of the following:
❏ Double-click the printer shortcut icon on your Windows taskbar. To add a shortcut icon to the
taskbar, refer to the following section.
& See “From the shortcut icon on the taskbar” on page 17.
B-310N/B-510DN User’s Guide
Replacing Consumables 146
To Next Page
Loading...
