Status and error messages
This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
Message Description
Cancel The print job is canceled.
Charging ink The printer is charging the ink.
Cleaning The printer is cleaning the print head.
Please wait The printer is starting.
The printer is initializing the settings.
Printing The printer is processing data.
Ready The printer is ready to print.
Power save The printer is in the power save mode.
Power off The printer is shutting down.
Reset The printer is resetting the settings.
The table below contains error messages, a brief description of each message and suggestions for
correcting the problem.
Message Problem Solutions
Service call see guide Service call error occurs. Turn off the printer and then back on. If the
error does not clear, contact Epson Service
Center.
& See “Contacting Epson Support” on
page 191.
Printer near end of service
life
Parts inside the printer are at the end of
their service life.
Contact Epson Service Center to replace
them.
& See “Contacting Epson Support” on
page 191.
B-310N/B-510DN User’s Guide
Using the Control Panel 130
To Next Page
Loading...
