8. Click Adjust Print Density to open the Print Density Adjustment window.
9. Select the appropriate document type as the Select Document Type setting.
10. Specify the Print Density and Increased Ink Drying Time as the Adjustments setting.
Note:
When you print data with dense photo on both sides of paper, reduce the print density and increase
the drying time to print finely.
11. Click OK to return to the Page Layout window.
12. Click Margins to open the Margins window.
13. Specify the edge of the paper where the binding will be placed. You can choose Left, Top, or
Right.
B-310N/B-510DN User’s Guide
Printing with Special Layout Options 68
To Next Page
Loading...
