11. Select 2-sided Printing Settings from the pop-up menu.
12. Select the 2-sided Printing check box.
13. Select the Binding edge setting.
14. Select one of the Select Document Type settings. This automatically adjusts Print Density and
Increased Ink Drying Time.
Note:
If you are printing high-density data, such as photos or graphs, we recommend adjusting the Print
Density.
15. Load paper into the printer, and click Print.
& See “Loading Paper” on page 25.
B-310N/B-510DN User’s Guide
Printing with Special Layout Options 78
To Next Page
Loading...
