Epson DS-770 II User Manual

5.
Set the
le
saving settings.
❏ Image Format: Select the save format from the list.
You can make detailed settings for each save format except BITMAP and PNG. Aer selecting the save
format, select Options from the list.
❏ File Name: Check the save le name displayed.
You can change settings for le name by selecting Settings from the list.
❏ Folder: Select the save folder for the scanned image from the list.
You can select other folder or create a new folder by selecting Select from the list.
6.
Click Scan.
Note:
❏ You can also start scanning by pressing
x button on the scanner.
❏ To scan originals that are likely to jam, for example thin paper, enable Slow mode by pressing the
button to slow
down the feeding speed.
Pressing the
(Slow Mode) button once slows down the paper feeding speed; press it again to return to normal
speed.
e scanned image is saved to the folder you specied.
Basic Scanning > Scanning from a Computer > Scanning Using Epson Scan 2
79

Epson DS-770 II Specifications

General

Optical Resolution	600 dpi
ADF Capacity	100 sheets
Scan Speed	45 ppm / 90 ipm
Connectivity	USB 3.0
Duplex Scanning	Yes
Ultrasonic Double Feed Detection	Yes
Scanning Method	Contact Image Sensor (CIS)
Scan Speed (Color, A4, 300 dpi)	45 ppm
Scan Speed (Black & White, A4, 300 dpi)	45 ppm
Document Feeder Capacity	100 sheets
Interface	USB 3.0
Supported Operating Systems	Windows, Mac OS
Scanner Type	Sheetfed
Max Document Size	215.9 mm x 6096 mm
Grayscale Depth	10-bit
Maximum Resolution	1200 dpi
Maximum Document Size	215.9 mm x 6096 mm
Minimum Document Size	50.8 mm x 50.8 mm
Color Depth	Input: 30 Bits Colour / 10 Bits Monochrome , Output: 24 Bits Colour / 8 Bits Monochrome