Whiteboard Screens (Whiteboard Mode)
108
Port Protocol Usage Communication
80 HTTP Connect/Transfer
images
two-way
443 HTTPS two-way
a
The communication bandwidth for sharing the whiteboard screen
differs depending on the amount of drawing content. Also, depending
on the total amount of drawing content, a broad bandwidth is
temporarily required when the connections starts.
a
Select the icon on the bottom toolbar.
a
You can also select Whiteboard Sharing on the Home screen.
The Whiteboard Sharing screen is displayed.
b
Select Start sharing with this whiteboard.
A PIN code is displayed for connecting to the projector.
c
Check the PIN code. If necessary, change it. You can set up to seven
digits for the PIN code.
a
Once you set the PIN code, you cannot change it until you end
whiteboard sharing.
d
Select one of the following as the Sharing Mode setting to permit
access to features by devices connecting to the whiteboard:
• Presentation: Connected devices can view and save the whiteboard
screen.
• Discussion: Connected devices can draw on the shared screen.
• Collaboration: Connected devices can access all available features
except creating a new meeting.
To Next Page
Loading...
