Epson EB-1470Ui - Connecting a Printer to the Control Pad; Connecting to a Document Camera; Connecting an External USB Keyboard to the Control Pad

Projector Connections
39
Connecting a Printer to the Control Pad
You can connect an Epson printer or all-in-one device to the Printer port
(USB-A port) on the control pad and use it to print your projected and
annotated content from the whiteboard.
a
• Make sure the printer meets the control command requirements.
• You can also connect a printer directly to the projector's USB-A port.
• You can also connect a network printer through the Whiteboard
Settings menu.
s Extended > Whiteboard Settings > Print
a
Connect the projector to the control pad.
b
Connect another USB cable to the Printer port (USB-A port) on the
control pad. Make sure the cable is no longer than 5 m.
c
Connect the other end of the cable to the USB type B port on the
printer.
Connecting to a Document Camera
You can connect a document camera to your projector to project images
viewed by the camera.
The connection method varies depending on your Epson document camera
model. See the document camera manual for details.
a
• You cannot connect a document camera to the control pad.
• Select USB2 as the image source when you connect a USB document
camera to one of the USB-A ports.
• You cannot use multiple USB document cameras at the same time.
Connecting an External USB Keyboard to the Control
Pad
You can connect an external USB keyboard to the USB-A port on the control
pad and use it to enter numbers and characters.
a
• The English keyboard (101 keyboard) is supported.
• You can only use the connected keyboard to configure the remote
desktop connection settings for a remote computer.
a
Connect the projector to the control pad.