Shutting Off the Image and Sound Temporarily
151
You can temporarily turn off the projected image and sound if you want to
redirect your audience's attention during a presentation. Any sound or video
action continues to run, however, so you cannot resume projection at the
point that you stopped it.
a
Press the [A/V Mute] button on the remote control to temporarily stop
projection and mute any sound.
b
To turn the image and sound back on, press [A/V Mute] again.
a
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature in the projector's ECO
menu.
s ECO > A/V Mute Timer
gg Related Links
• "Projector Setup Settings - Extended Menu" p.219
• "Projector Setup Settings - ECO Menu" p.240
To Next Page
Loading...
Need help?
General
