Projector Parts and Functions
23
Projector Parts - Control Pad
Name Function
A
Cable path (upper) Open the cover to route cables through here.
B
Cable path Route cables through here.
C
Screw holes (for
installation)
The screw holes for securing the control pad.
D
Power button [ ]
Turns the projector on or off.
From now on, referred to as the power button.
E
[Whiteboard] button Turns the projector on (if necessary) and displays
whiteboard mode.
Switches to the previous input source during
whiteboard mode.
F
[Source Search]
button
Changes to the next input source.
Name Function
G
USB-B port (for
connecting a
computer)
Connects a USB cable to the computer to project
computer images or to use the interactive pen as a
mouse.
H
USB-A port (for
connecting USB
storage)
Connects a USB storage device.
I
USB-A port (for
connecting a
keyboard)
Connects an external USB keyboard.
J
USB-A port (for
connecting a printer)
Connects a USB cable to the printer.
K
USB-B port (for
connecting a
projector)
Connects a USB cable to the projector when
connecting a USB storage device, printer, or USB
keyboard to the control pad.
L
USB-A port (for
connecting a
projector)
Connects a USB cable to the projector when
connecting a computer to the control pad.
M
Remote port Connects to the projector with the cable supplied with
the control pad to power the control pad.
N
Front cover Open to connect cables.
O
Cable cover Open this cover when cables are wired along a wall.
a
Stick the supplied port protection stickers on the ports that are not
being used.
To Next Page
Loading...
