Projector Connections
41
c
Select the Extended menu and press [Enter].
d
Select the A/V Settings setting and press [Enter].
e
Select DVI Output and press [Enter].
f
Select the image source you want to display on the DVI monitor.
• Whiteboard: Displays whiteboard screen.
• Projected Image: Displays currently projected image source.
g
Press [Menu] or [Esc] to exit the menus.
Connecting to a VGA Monitor
If you connected the projector to a computer using a Computer port, you can
also connect an external monitor to the projector. This lets you see your
presentation on the external monitor even when the projected image is not
visible.
a
• If you want to output images to an external monitor when the
projector is turned off, select Always On as the A/V Output setting
in the projector's Extended menu.
s Extended > A/V Settings > A/V Output
• Content drawn on the screen using the interactive features is not
displayed on an external monitor. To display the drawn content on
an external monitor, use the supplied Easy Interactive Tools.
• Monitors that use a refresh rate of less than 60 Hz may not be able to
display images correctly.
a
Make sure your computer is connected to the projector's Computer
port.
a
• Only analog RGB signals from the Computer port can be
output to an external monitor. You cannot output signals
input from other ports or component video signals.
To Next Page
Loading...
Need help?
General
