Projector Information Display - Info Menu
244
Event ID
code
Cause and solution
0891 Cannot find an access point with the same SSID. Set your computer,
access point, and projector to the same SSID.
0892 The WPA/WPA2 authentication type does not match. Make sure the
wireless network security settings are correct.
0893 The WEP/TKIP/AES encryption type does not match. Make sure the
wireless network security settings are correct.
0894 Communication with an unauthorized access point was
disconnected. Contact your network administrator.
0898 Failed to acquire DHCP. Make sure the DHCP server is operating
correctly. If you are not using DHCP, set the DHCP setting to Off in
the projector's Network menu.
s Network > Network Configuration > Wireless LAN > IP
Settings > DHCP
s Network > Network Configuration > Wired LAN > IP Settings
> DHCP
0899 Other communication errors.
089A The EAP authentication type does not match the network. Check the
wireless LAN security settings and make sure that the security
certificate is installed correctly.
089B EAP server authentication failed. Check the wireless LAN security
settings and make sure that the security certificate is installed
correctly.
089C EAP client authentication failed. Check the wireless LAN security
settings and make sure that the security certificate is installed
correctly.
089D Key exchange failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
0920 The internal battery that saves the projector's date and time settings
is running low. Contact Epson for help.
Event ID
code
Cause and solution
0B01 The internal storage could not be detected correctly. Turn off the
projector and disconnect the power cord, then reconnect the power
cord and turn the projector back on. The internal storage is
recovered when the projector is turned on and all of the Whiteboard
Settings menu items are returned to the default settings. The
template information, address book, and shared whiteboard
connection logs saved in the internal storage are deleted. If that does
not solve the problem, contact Epson for help.
0BFF An error has occurred in the whiteboard function. Restart the
projector.
Info Menu - Light Source Info Menu
You can display the projector's light source information by viewing the Light
Source Info menu in the projector's Info menu.
Information item Description
Light Source Hours Displays the number of operating hours for each of the
projector's Light Source Mode settings.
To Next Page
Loading...
