Epson EB-1470Ui - Projector Parts - Pen Stand

Projector Parts and Functions
22
Name Function
A
Pen tip Replaceable soft pen tip.
If the soft tip is hard to use on a textured surface,
replace it with the hard tip.
B
Battery indicator Press the button on the side of the pen to indicate the
remaining battery power.
• When the battery is charged, the indicator turns blue
until you release the button.
• When the battery is running low, the indicator
flashes blue until you release the button.
• Does not light when the battery is exhausted. Change
the battery.
C
Button When Pen Button Function is set to Eraser in the
projector's Extended menu, press the button to switch
the tip function between pen and eraser while drawing.
When Pen Button Function is set to Open Drawing
Toolbar, press the button to display the toolbar near
the pen tip.
When Pen Button Function is set to Clear Screen,
press the button to erase all the contents drawn on the
projected screen.
s Extended > Easy Interactive Function > General
> Advanced > Pen Button Function
Press the button to perform a right-click operation
while using the pen as a mouse.
D
Strap attachment
point
Allows you to attach a commercially available strap.
E
Battery cover Open this cover when replacing the battery.
gg Related Links
• "Replacing the Interactive Pen Tip" p.260
Projector Parts - Pen Stand
Name Function
A
Front cover Open to install the pen stand.
B
Pen tip storage space Keep the pen tips here.
C
Pen storage space Keep the pens here.
D
Battery storage space Keep the AA batteries here.
E
Screw holes (for
installation)
The screw holes for securing the pen stand.