Projector Setup Settings - Extended Menu
223
Setting Options Description
Power Power: turns on the Touch Unit power.
Angle Adjustment Angle Adjustment: performs angle
adjustment for laser diffusion.
Touch Calibration Touch Calibration: performs calibration
for touch operations with your finger.
Pen Mode PC Free
Annotation
PC Interactive
Selects the mode for the interactive pens.
When set to PC Free Annotation, you
can draw on the projected screen. When
set to PC Interactive, you can operate a
computer from the projected screen.
Hovering On
Off
When set to On, the pointer follows the
pen tip as you hover it over the screen
and move it around.
Advanced
(Advanced section)
Distance of
Projectors
Distance of Projectors: select Mode 2. If
the distance between the projectors is
longer than 2 m, or if the interactive pen
operation is unstable in Mode 2, select
Mode 1.
Sync of Projectors Sync of Projectors: if the projectors are
connected using the optional remote
control cable set, select Wired.
Multi-Projection Multi-Projection: selects the position
(right or left) for each projected screen
when you set your projector's interactive
features with two projectors installed side
by side.
Wired Sync Mode Wired Sync Mode: if the projectors are
not connected using the optional remote
cable set, or if the interactive pen
operation is unstable in Mode 1, select
Mode 2.
Preset Pen
Thickness
Preset Pen Thickness: selects Normal or
Thin as the line thickness from thin
width or thick width.
Setting Options Description
Eraser Size Eraser Size: selects Normal or Large as
the erasable area from thin width or
thick width.
Color Palette Color Palette: allows you to select
Palette 2 if certain colors in the default
color palette are difficult to see.
Advanced (PC Free
Annotation
section)
Pen Button
Function
Pen Button Function: sets the function
of the button on the side of the
interactive pen in annotation mode.
Default Touch
Action
Default Touch Action: allows you to
select whether to activate Eraser or PC
Interactive when you switch to
annotation mode.
Confirm Clear
Screen
Confirm Clear Screen: when set to On, a
confirmation screen is displayed before
clearing all the content drawn on the
projected screen.
PC Interactive
Settings on the PC Interactive section let you set various settings when you
want to operate a computer from the projected screen.
s Extended > Easy Interactive Function > PC Interactive
To Next Page
Loading...
