Epson EB-1470Ui - Page 220

Projector Setup Settings - Extended Menu
220
Setting Options Description
Projection Front
Front/Upside
Down
Rear
Rear/Upside Down
Selects the way the projector faces the
screen so the image is oriented correctly.
Operation Selects various operation options:
Direct Power On Direct Power On: lets you turn on the
projector by plugging it in without
pressing the power button.
High Altitude
Mode
High Altitude Mode: regulates the
projector’s operating temperature at
altitudes above 1500 m.
Auto Source Search Auto Source Search: set to On to detect
the input signal automatically and
project images when there is no input
signal.
This function is disabled when you turn
on the projector in the Quick Startup
mode.
Auto Power On Auto Power On: select the image source
from which you want to automatically
start projection. When the projector
detects the input signal from the selected
image source, it projects automatically in
standby mode.
The following image sources are available
for this feature:
• HDMI1
• Computer
• USB Display
Setting Options Description
Quick Startup Quick Startup: select the time period for
Quick Startup mode. The projector
enters this mode when you turn it off.
You can start projecting in
approximately five seconds by pressing
the power button.
(Set A/V Output to While Projecting
first.)
However, it may take longer to become
ready for use in the following situations:
• When projecting from the projector's
USB port
• When projecting from the projector's
DVI-D Out port
• When projecting using the Screen
Mirroring features
• If whiteboard sharing was terminated
in the previous session
• If you want to restore the whiteboard
contents from the previous session
Date & Time Date & Time: adjusts the projector's
system time and date settings.
• Daylight Saving Time: set to On to
activate daylight saving time.
• Internet Time: set to On to update the
time automatically through an Internet
time server.
A/V Settings Selects various audio and video output
settings:
A/V Output A/V Output: set to Always On to output
audio and images to external devices
when the projector is in standby mode.
(Set Quick Startup to Off first.)
Audio Output Audio Output: selects the audio input
port when projecting images from
anything except for HDMI ports.