Projector Connections
44
e
In the General section, select Advanced, and then press [Enter].
f
Select Sync of Projectors and press [Enter].
g
Select Wired and press [Enter].
h
Press [Menu] or [Esc] to exit the menus.
a
• If you are using the projector in the same room as another
projector that does not support cable connection, set the
Wired Sync Mode setting to Mode 2 in the projector's
Extended menu.
s Extended > Easy Interactive Function > General >
Advanced > Wired Sync Mode
• If you do not have the optional remote control cable set,
change the Distance of Projectors setting in the projector's
Extended menu.
s Extended > Easy Interactive Function > General >
Advanced > Distance of Projectors
To Next Page
Loading...
