80
Inserting and Ejecting a SD Card (EB-W6 only)
You can project image files from a inserted SD card or SDHC (SD
High Capacity) card in Slideshow.s p.90
From here on these are referred to as SD cards.
The following explains how to insert and eject SD cards.
Inserting a SD Card
Insert the SD card into the card slot with its top surface
facing up.
Firmly insert the card as far as it can go.
Reading the SD Card Access Lamp
The SD card access lamp is lit or flashing as follows to indicate the access
status of the SD card.
Attention
Insert the SD card so that it faces the correct direction. Inserting a
card in the wrong direction may result in malfunction or damage.
Procedure
SD card
(commercially available)
: Flashing : Lit : Off
Lamp Status
Reading data from the SD card.
SD card is standing by.
SD card is not being accessed.
To Next Page
Loading...
Need help?
General
