72
Saving a User's Logo
You can save the image that is currently being projected as a user's
logo.
A
Project the image you want to use as the user's
logo, and then press the [Menu] button.
B
From the configuration menu, select "Extended" -
"User's Logo".
EB-W6 s p.37
EB-X6 s p.38
EB-S6 s p.39
Check the buttons you can use and the operations they perform in
the guide under the menu.
q
When registering a user logo , the current user logo is
erased and the default setting is not resumed.
Procedure
Using the remote control
EB-W6 EB-X6/S6
Using the control panel
EB-W6/X6 EB-S6
q
• If "User's Logo Protect" from "Password Protect" is set
to "On", a message is displayed and the user's logo
cannot be changed. You can make changes after setting
"User's Logo Protect" to "Off".
s
p.31
• If "User's Logo" is selected when Keystone, E-Zoom, or
Aspect are being performed, the function currently being
performed is cancelled.
To Next Page
Loading...
Need help?
General
