Projector Parts and Functions
14
Projector Parts - Remote Control
Name Function
A
Power button [ ]
Turns the projector on or off.
B
[HDMI] button Switches the image source between the HDMI ports.
C
[Computer] button Switches the image source between the Computer1 and
Computer2 ports.
D
[Keystone] button Displays the Keystone screen allowing you to correct
keystone distortion of the projected image.
E
[Effect] button Displays the Overlay Effect menu in Content Playback
mode.
F
Numeric buttons Allows you to enter numbers in the projector's menu
while holding down the [Num] button.
In Content Playback mode, enter numbers while
holding down the [Num] button to play back your
favorite playlists.
G
[Auto] button Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog
RGB signal from the Computer port.
H
[Num] button Hold down this button to enter numbers using the
numeric buttons.
I
[Menu] button Displays and closes the projector's menu.
J
Arrow buttons Selects menu items while displaying the projector's
menu or help.
K
[Enter] button [ ] Enters the current selection and moves to the next level
while displaying the projector's menu or help.
L
[User] button Performs settings assigned in the User Button setting
in the projector's Settings menu.
M
[Color Mode] button Changes the color mode.
N
[Aspect] button Changes the aspect mode.
O
[E-Zoom] +/–
buttons
Resizes the projected image.
P
[A/V Mute] button Turns the video and audio on or off temporarily.
Q
[Split] button Projects two images from different image sources
simultaneously by splitting the projected screen.
To Next Page
Loading...
Need help?
General
