Epson EB-U50 User Manual

Using Multiple Projectors
73
You can combine the projected images from two or more projectors to create
one large image.
a
• Before starting projection, make sure you select Multi-Projection as
the Color Mode setting for all of the projectors.
s Extended > Multi-Projection > Color Mode
gg Related Links
• "Projector Identification System for Multiple Projector Control" p.73
• "Adjusting Color Uniformity" p.75
• "Blending the Image Edges" p.76
• "Scaling an Image" p.77
• "Adjusting the Projector's Brightness Level" p.78
• "Matching the Image Colors" p.79
Projector Identification System for Multiple Projector
Control
When lining up multiple projectors to project images, you can correct the
brightness and color tone of each projector's image so that the images match
closely.
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
a
• In some cases the brightness and color tone may not match
completely even after correction.
• If brightness and color tone differences become more noticeable over
time, repeat the adjustments.
gg Related Links
• "Setting the Projector ID" p.73
• "Selecting the Projector You want to Operate" p.74
Setting the Projector ID
To control multiple projectors from a remote control, give each projector a
unique ID.
a
Press the [Menu] button, select the Extended menu, and press [Enter].
b
Select Multi-Projection and press [Enter].
c
Select Projector ID and press [Enter].

Epson EB-U50 Specifications

General

Brand	Epson
Model	EB-U50
Category	Projector
Language	English